Lighting fixture bathroom device can be replaced by a normal bulb on the ceiling of a bathroom. To connect the device correctly, connect the cables of the device to the cables in the electrical connection box inside the ceiling plate. The black and white cables attached to the electrical connection box and for fixing exclude the possibility of incorrectly wiring the lamp. You will need some basic household tools.
Go to the fuse box and fire the circuit breaker that supplies electrical power to the bathroom. Place a ladder under the bulb on the bathroom ceiling. Unscrew the bulb from the bulb socket. Put the bulb aside. Remove the screws from the ceiling plate, using a Phillips screwdriver. Pull the roof plate. Pull the wires out of the hole in the ceiling. Twist the flange thread connectors to the left to remove them from the twisted pairs of black and white wires. Separate the wires from the other. Place the ceiling plate aside.
Wind the exposed end of the black wire on the bottom of the bathroom luminaire around the exposed end of the black wire that is attached to the electrical connection box. Wind the exposed end of the white wire from the appliance to the exposed end of the white wire in the electrical junction box.
12 Ideas To Install Lighting Fixture Bathroom Photos