Wall Pattern Design With Ceramic Tile Bathroom

Author: admin | Categories: Bathroom Tile comments
Shower Floor Tile

Wall tile is a key element for bathroom design. The ceramic tile bathroom can be decorative or utilitarian, isolating the water moisture from the walls. If you opt for tile the walls of the shower or bath, you may not want to simply install the tiles in a simple, up-and-down pattern. If this is the case, and you want to install the tiles in a more decorative way, design your design ahead of time in a dry-fit design.

Measure the wall to be coated. Mark an area of equal size to the wall measured on a flat surface such as a floor or work table. Place the first tile of what will be the lower center part of the wall. This will give the wall a balanced installation. You can put this tile at the point of a diagonal installation, or glue the pieces on top of it in a pattern or working model of the scroll link.

Move the tiles around in the space to help determine the final design. You can put the tiles in a direction halfway up the wall and then change the model. Take into account the grout joints and make sure all your lines remain straight. Make all your tile cuts at this time. And place the cut tiles back into the dry-design with the entire tiles to check your pattern. And to ensure this is what you want before installing the tiles on the wall.

Comments are closed.